+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 20 of 38

Thread: nokia 1680 muerto, ayuda porfavor

  1. #1
    Registered User Kyrier is on a distinguished road
    Join Date
    Nov 2008
    Posts
    18
    Thanks
    10
    Thanked 6 Times in 4 Posts
    Rep Power
    0

    nokia 1680 muerto, ayuda porfavor

    Paso lo siguiente... me vino un nokia 1680, rm490 version 6.83, lo cambie a rm 395 05.61 y murio, ahora no me enciende y no conecta, no le logro subir ninguna versión de software, pues me aparece lo siguiente:

    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.mcusw
    Booting phone...
    MCU ID: 0x3168
    This MCU ID is not supported in chosen flash file...
    Error booting phone...


    en realidad ya probe muchas cosas y nada funciona.... ayuda porfavor

  2. #2
    Registered User the_phantomas is on a distinguished road the_phantomas's Avatar
    Join Date
    Dec 2008
    Location
    SANTA FE
    Posts
    175
    Thanks
    40
    Thanked 69 Times in 47 Posts
    Rep Power
    6
    Quote Originally Posted by Kyrier View Post
    Paso lo siguiente... me vino un nokia 1680, rm490 version 6.83, lo cambie a rm 395 05.61 y murio, ahora no me enciende y no conecta, no le logro subir ninguna versión de software, pues me aparece lo siguiente:

    Failed! Aborting!
    Failed to backup imei...
    MCU: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.mcusw
    Booting phone...
    MCU ID: 0x3168
    This MCU ID is not supported in chosen flash file...
    Error booting phone...

    en realidad ya probe muchas cosas y nada funciona.... ayuda porfavor
    amigo.... hace asi cargale la misma... pero por separado.... ejemplo
    1)mcu
    2)ppm
    o viceversa.... no te olvides de tildar flash manual y factory Set....

    no vas a tener problem...

  3. #3
    Registered User TICTAC_M is on a distinguished road TICTAC_M's Avatar
    Join Date
    Jun 2008
    Posts
    239
    Thanks
    14
    Thanked 79 Times in 59 Posts
    Rep Power
    6
    busca la version rm394 06.82 con esta lo revives pero por el momento no se puede liberar - queda sin señal

    pd: chequea en skip > mcuid esto para que puedas flashear.
    Last edited by TICTAC_M; 18th-June-2009 at 09:43 PM.

  4. #4
    Super Moderator polaco is on a distinguished road polaco's Avatar
    Join Date
    Nov 2008
    Location
    RasKal Friend
    Posts
    1,749
    Thanks
    214
    Thanked 572 Times in 361 Posts
    Rep Power
    7

    1680 survive!!!

    Quote Originally Posted by TICTAC_M View Post
    busca la version rm394 06.82 con esta lo revives pero por el momento no se puede liberar - queda sin señal

    pd: chequea en skip > mcuid esto para que puedas flashear.
    Por fin...el 1680!!! sale ful unlock y numeritos

    editar ini para que logre hacer unlock y figura en la lista del .ini(cel no soprtado dice si no lo haces)
    flashear a la 5.61
    yo leleji flash manual, del paquete de UB, la version 5.61, flashee, termino, luego metodo ip1, darle su misma mcu..


    NO IMPORTA SI QUEDA EN SERVICE MODE, CUANDO LE HACES EL NUMERO Y LE DAS LA MCU SE ARREGLA, Y TODOS CONTENTOS


    polaco cute & paste

  5. #5
    Registered User thedoctor is on a distinguished road
    Join Date
    May 2008
    Posts
    35
    Thanks
    5
    Thanked 1 Time in 1 Post
    Rep Power
    0
    ok pero la vercion que dices elpolacodecasteiil es la rm490 de tmobile,esa es la unica que he podido hacer

  6. #6
    Registered User TICTAC_M is on a distinguished road TICTAC_M's Avatar
    Join Date
    Jun 2008
    Posts
    239
    Thanks
    14
    Thanked 79 Times in 59 Posts
    Rep Power
    6
    y es la unica que se puede del rm-490 v6.22 y esta posteado en alguna parate del foro. ahora en este post estemos hablando de la 6.83 que es diferente, algo parecido a lo que ocurre con el 2610 que tiene algunas versiones en dct4+, dct4++ y la nueva 7.04a -> igual problema que el rm-490 6.83 o rm-391 6.83.

  7. #7
    Super Moderator polaco is on a distinguished road polaco's Avatar
    Join Date
    Nov 2008
    Location
    RasKal Friend
    Posts
    1,749
    Thanks
    214
    Thanked 572 Times in 361 Posts
    Rep Power
    7

    1680 survive!!!

    Quote Originally Posted by TICTAC_M View Post
    y es la unica que se puede del rm-490 v6.22 y esta posteado en alguna parate del foro. ahora en este post estemos hablando de la 6.83 que es diferente, algo parecido a lo que ocurre con el 2610 que tiene algunas versiones en dct4+, dct4++ y la nueva 7.04a -> igual problema que el rm-490 6.83 o rm-391 6.83.
    Habria que probar lo que dice titac, y si queda sin señal, tirale la pm guardada de la de la 5.61....
    por ejemplo, hay casos de 1208 que quedan sin señal luego del flash, entonces le escribis la pm del 105 y full señal....

    rompiendo se aprende mucho.....no te conjfundas pm con mcu

    polaco

  8. #8
    Registered User Kyrier is on a distinguished road
    Join Date
    Nov 2008
    Posts
    18
    Thanks
    10
    Thanked 6 Times in 4 Posts
    Rep Power
    0
    amigos... no he podido solucionar mi problema, me podrian ayudar postendo el enlace para descargar la version 06.82, no la encuentro por ningun lado.... les voy a agradecer bastante

  9. #9
    Registered User lobo estepario is on a distinguished road lobo estepario's Avatar
    Join Date
    Mar 2009
    Location
    Chaco Argentina
    Posts
    164
    Thanks
    105
    Thanked 33 Times in 26 Posts
    Rep Power
    6
    Quote Originally Posted by Kyrier View Post
    amigos... no he podido solucionar mi problema, me podrian ayudar postendo el enlace para descargar la version 06.82, no la encuentro por ningun lado.... les voy a agradecer bastante
    con la rm-394 v 5.61 sale, esa esta en el soporte con esa lo saco full yo
    Last edited by lobo estepario; 26th-June-2009 at 12:53 AM.
    ¡¡buena suerte y hasta luego lobo estepario!!

  10. #10
    Registered User rogermoore is on a distinguished road rogermoore's Avatar
    Join Date
    Dec 2008
    Posts
    67
    Thanks
    14
    Thanked 4 Times in 4 Posts
    Rep Power
    6
    como edito el ini?

  11. #11
    Super Moderator polaco is on a distinguished road polaco's Avatar
    Join Date
    Nov 2008
    Location
    RasKal Friend
    Posts
    1,749
    Thanks
    214
    Thanked 572 Times in 361 Posts
    Rep Power
    7

    Re facil

    Quote Originally Posted by rogermoore View Post
    como edito el ini?

    Solo fijate como estan los demas modelos, te vas a los dct4, pones los modelos que no tenes, de la misma manera q figuran ahi...El ini es un archivo txt..Mientraz no lo estes usando, le haces doble click y te fijas

    Ejemplo..[DCT4PLUS]
    PHONE1=RM-291
    PHONE2=RH-97
    PHONE3=RH-94
    PHONE4=RH-93
    PHONE5=RM-189
    PHONE6=RM-225
    PHONE7=RH-98
    PHONE8=RH-99
    PHONE9=RH-105
    PHONE10=RH-100
    PHONE11=RM-305
    PHONE12=RM-306
    PHONE13=RH-106
    PHONE14=RH-92

    [DCT4PLUSPLUS]
    PHONE1=RM-298
    PHONE2=RM-258
    PHONE3=RM-340
    PHONE5=RH-87
    PHONE6=RH-86
    PHONE7=RM-299
    PHONE8=RM-292
    PHONE9=RM-293
    PHONE10=RM-259
    PHONE11=RM-291
    PHONE12=RM-362
    PHONE13=RM-363
    PHONE14=RM-394
    PHONE15=RH-116
    PHONE16=RM-392

    Phoe 17 y le pones la rm o rh que te haga falta..es mas..busca en el foro que esta para 1680


    Descomprimi el files q te envio dentro de la carpea odeom/jaf


    polaco
    Attached Files

  12. The Following 5 Users Say Thank You to polaco For This Useful Post:

    freshcamell21 (13th-January-2010), jzelaya (4th-July-2009), kjuma (14th-September-2009), mandrakeelmago (2nd-September-2009), rogermoore (23rd-June-2009)

  13. #12
    Registered User rogermoore is on a distinguished road rogermoore's Avatar
    Join Date
    Dec 2008
    Posts
    67
    Thanks
    14
    Thanked 4 Times in 4 Posts
    Rep Power
    6
    gracias polaco(se supone ke aprete el boton para agradecerte pero creo ke me mando un error)

  14. The Following User Says Thank You to rogermoore For This Useful Post:

    mandrakeelmago (2nd-September-2009)

  15. #13
    Registered User Kyrier is on a distinguished road
    Join Date
    Nov 2008
    Posts
    18
    Thanks
    10
    Thanked 6 Times in 4 Posts
    Rep Power
    0
    amigos, no encuentro el software rm 394 con la version 06.82......ya me desespere, les agradeceria infinitamente si pudieran postearlo por este medio

  16. #14
    Registered User thedoctor is on a distinguished road
    Join Date
    May 2008
    Posts
    35
    Thanks
    5
    Thanked 1 Time in 1 Post
    Rep Power
    0
    hola amigo kyrier aqui te pongo un link para que bajes ese archivo
    http://www.4shared.com/network/searc...lue=10&start=0

  17. The Following User Says Thank You to thedoctor For This Useful Post:

    Kyrier (25th-June-2009)

  18. #15
    Registered User lobo estepario is on a distinguished road lobo estepario's Avatar
    Join Date
    Mar 2009
    Location
    Chaco Argentina
    Posts
    164
    Thanks
    105
    Thanked 33 Times in 26 Posts
    Rep Power
    6
    Quote Originally Posted by Kyrier View Post
    amigos, no encuentro el software rm 394 con la version 06.82......ya me desespere, les agradeceria infinitamente si pudieran postearlo por este medio
    con la rm-394 v 5.61 sale, esa esta en el soporte con esa lo saco full yo esta en soporte
    ¡¡buena suerte y hasta luego lobo estepario!!

  19. #16
    Super Moderator polaco is on a distinguished road polaco's Avatar
    Join Date
    Nov 2008
    Location
    RasKal Friend
    Posts
    1,749
    Thanks
    214
    Thanked 572 Times in 361 Posts
    Rep Power
    7

    1680 by polaco

    Quote Originally Posted by Kyrier View Post
    amigos, no encuentro el software rm 394 con la version 06.82......ya me desespere, les agradeceria infinitamente si pudieran postearlo por este medio
    Fijate y dale esa pm

    1680c V6.82 unlock solution!
    Hi all this is soluton 4 unlock 1680c V6.82 with JAF

    1. Full Erase flash
    2. Flesh phone with V5.63
    3. Write Full & Good PM
    4. Unlock phone
    5. Full reset.

    The GOOD PM is very important to work's OK your Phone!!
    If you write the bad PM you phone will be power On with NO charging problem!!

    Esto esta posteado en Hosting, que es casi lo mismo que te dije mas arriba...full y despues PM buena



    polaco
    Attached Files

  20. The Following User Says Thank You to polaco For This Useful Post:

    Kyrier (26th-June-2009)

  21. #17
    Registered User yankee02 is on a distinguished road
    Join Date
    Jul 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Podrias explicarme como configurar el ini.

    Podria algien explicarme como configurar el ini de la jaf con detalles mas claros por favor, porque aun no entiendo como es que lo debo hacer y necesito configurarlo para liberar los nokias 1680c-2b y el nokia 2600c-2b, lo tenia todo bien arreglado y los liberaba pero format la pc y se me perdio toda la informacion. Porfavor cualquier ayuda es buena. Gracias!!!!!!

    Quote Originally Posted by elpolacodecastelli View Post
    Solo fijate como estan los demas modelos, te vas a los dct4, pones los modelos que no tenes, de la misma manera q figuran ahi...El ini es un archivo txt..Mientraz no lo estes usando, le haces doble click y te fijas

    Ejemplo..[DCT4PLUS]
    PHONE1=RM-291
    PHONE2=RH-97
    PHONE3=RH-94
    PHONE4=RH-93
    PHONE5=RM-189
    PHONE6=RM-225
    PHONE7=RH-98
    PHONE8=RH-99
    PHONE9=RH-105
    PHONE10=RH-100
    PHONE11=RM-305
    PHONE12=RM-306
    PHONE13=RH-106
    PHONE14=RH-92

    [DCT4PLUSPLUS]
    PHONE1=RM-298
    PHONE2=RM-258
    PHONE3=RM-340
    PHONE5=RH-87
    PHONE6=RH-86
    PHONE7=RM-299
    PHONE8=RM-292
    PHONE9=RM-293
    PHONE10=RM-259
    PHONE11=RM-291
    PHONE12=RM-362
    PHONE13=RM-363
    PHONE14=RM-394
    PHONE15=RH-116
    PHONE16=RM-392

    Phoe 17 y le pones la rm o rh que te haga falta..es mas..busca en el foro que esta para 1680


    Descomprimi el files q te envio dentro de la carpea odeom/jaf


    polaco

  22. #18
    Registered User kil.com2 is on a distinguished road
    Join Date
    Sep 2008
    Posts
    15
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    gracias hermano por tu aporte pude hacer ok


    JAF version 1.98.63
    Detected PKEY: xxxxxxxxxxxxx
    Card life counter: 6.53%
    P-key nokia module version 01.02
    Detected UFS_USB V2.6 (c) SarasSoft 2005. version: 01.B1, Driver version: 0, Library version: 0
    JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
    JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
    JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
    JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
    USB Cable Driver version: 7.1.17.0
    Setting local mode...
    Reading product code...
    Product Code: 0576679
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-395\
    Searching for default location of ini...
    Checking path: \Products\RM-395\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-395\
    Scanning ini files...
    Checking path: \Products\RM-395\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-395\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.ppm_mtm
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.image_mtmus
    ADSP Flash file: NONE
    APE Variant file: NONE
    APE User Flash file: NONE
    Backing up PM Field 208 as RPL...
    Setting local mode...
    Reading IMEI...
    Reading IMEI data...
    Building RPL backup file...
    C:\Program Files\ODEON\JAF\ProgData\011671005801464_imei_back up_942268.rpl
    Done!
    Backup imei OK!
    MCU: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.mcusw
    Booting phone...
    MCU ID: 0x3162
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E310100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84A8DF13846018BD9589E435B4
    MSID decoded: 2C40BAE900DDBEF2AA000000
    FAID: 0A38BD1F95C35E9044D4BA28
    Operation took 0 minutes 18 seconds...
    Erasing...
    Found 2 interval(s) to erase
    Erasing area: 01000000 - 0101FFFF...
    Erasing area: 01020000 - 01C3FFFF...
    Operation took 1 minutes 25 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 4 minutes 25 seconds...
    Restarting MCU...
    CNT: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.image_mtmus
    Booting phone...
    MCU ID: 0x3162
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E310100
    File is already converted to 128k page...
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84401E4FAEF8B06C0F28B04069
    MSID decoded: D26EBAF100DDBEF2AA000610
    FAID: A2B8C265B1F1BD56C3D05DFA
    Operation took 0 minutes 17 seconds...
    Erasing Content Pack...
    Found 2 interval(s) to erase
    Erasing area: 02000000 - 02DBFFFF...
    Erasing area: 02DC0000 - 02F9FFFF...
    Operation took 3 minutes 38 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 2 minutes 38 seconds...
    Restarting MCU...
    Operation took 0 minutes 0 seconds...
    Extracting Content Pack...
    Running: (c) Nokia File Server
    CNT Extract OK.
    Operation took 0 minutes 12 seconds...
    PPM: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.ppm_mtm
    Booting phone...
    MCU ID: 0x3162
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E310100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84C1DD3F00FF7DD944C594FDBE
    MSID decoded: 3E4EBAE900DDBEF2A9000000
    FAID: 3A67731D7252C14129AAEC0F
    Operation took 0 minutes 16 seconds...
    Erasing PPM...
    Found 1 interval(s) to erase
    Erasing area: 01C40000 - 01FFFFFF...
    Operation took 0 minutes 29 seconds...
    Writing...
    Perm. Data Restore OK
    Operation took 1 minutes 15 seconds...
    Restarting MCU...
    Flashing Done!
    Operation took 15 minutes 4 seconds...
    After flash processing...
    Waiting for phone to boot...
    Reading...
    Phone type: RM-395, Software version: 05.61
    IMEI: 011671005801464
    Product Code: 0576679
    Resetting PPC...
    Setting FULL FACTORY......Setting test mode...
    Setting FULL FACTORY...
    Operation took 0 minutes 6 seconds...
    Done!
    Done!
    Done!
    Powering the phone...
    Unlocking...
    IMEI: 011671005801464
    ASIC: b
    SW version: 05.61
    Selected flash file: C:\Program Files\Nokia\Phoenix\Products\RM-395\rm394__05.61.mcusw
    Decrypting flash...Done
    Checking ROM call...Done
    Checking security function...Done
    Encrypting....Done
    Patch status: 00
    MCU ID: 0x3162
    BOOT file: C:\Program Files\ODEON\JAF\Flash\u3_2nd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Boot size is 0x09A8
    Boot is ready...
    FLASH ID0: 317E0001 <=> SPANSION -> Type not in database Addr0: 0x01000000 - 0x01FFFFFF, SectorSize0: 11
    FLASH ID1: 317E0001 <=> SPANSION -> Type not in database Addr1: 0x02000000 - 0x02FFFFFF, SectorSize1: 11
    First 16 bytes: AD 7E B6 1A 1B BE 0B E2 7D 58 6B E4 DB EE 65 14
    Flash ID is 0x7E310100
    Flash loader is C:\Program Files\ODEON\JAF\Flash\u3_amd.fia
    Loader version: 04.46.01 -> Revision: 0007
    Loader size is 0x7528; Loader chk: a2
    Loader is ready...
    P-key nokia module version 01.02
    MSID: 84A8DF13846018BD9589E435B4
    MSID decoded: 2C40BAE900DDBEF2AA000000
    FAID: 0A38BD1F95C35E9044D4BA28
    Erasing area: 01000000 - 0101FFFF...
    Erasing area: 01080000 - 0109FFFF...
    Perm. Data Restore OK
    Unlocking...
    Checking locks...
    Block 1:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 2:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 3:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 4:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 5:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 6:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Block 7:
    Lock 1: OPEN Lock 2: OPEN Lock 3: OPEN Lock 4: OPEN Lock 5: OPEN
    Done!
    DCT4 unlock counter: 1

  23. #19
    Super Moderator polaco is on a distinguished road polaco's Avatar
    Join Date
    Nov 2008
    Location
    RasKal Friend
    Posts
    1,749
    Thanks
    214
    Thanked 572 Times in 361 Posts
    Rep Power
    7

    1680

    Quote Originally Posted by giaungochoang View Post
    I have a USA Tmobile Nokia 1680c RM490, V6.83. I'm living in VietNam so i can use it. How can I get a free unlock code? Help me! Please PM . Thanks!
    for this model try downgrade to 5.2 and unlock, an them write this pm files...
    the mcu MCU ID: 0x3168 still not support

    saludos


    polaco
    Last edited by enanopel; 27th-September-2009 at 03:10 AM.

  24. #20
    Registered User giaungochoang is on a distinguished road
    Join Date
    Sep 2009
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    0
    Quote Originally Posted by el-polaco View Post
    for this model try downgrade to 5.2 and unlock, an them write this pm files...
    the mcu MCU ID: 0x3168 still not support

    saludos


    polaco
    Thanks a lot. But I'm a newbie. Can I get the IMEI unlock code from T-mobile. Can U help me!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Visitors found this page by searching for:

nokia 1680 no prende

como flashear nokia 1680

flashear nokia 1680

como resetear nokia 1680

resetear nokia 1680c-2b

nokia 1680 muerto

flash nokia 1680

nokia 1680 flashear

nokia 1680 test mode

como resetear un nokia 1680

nokia 1680 sin señal

FORMATEAR nokia 1680nokia1680 como flaseorevivir nokia 16801680 no prendeprograma para flashear nokia 1680nokia 1680 flashresetear nokia 1680reset nokia 1680test mode nokia 1680 nokia 1680 no se deja flsharcomo flashear el nokia 16801680 muertoflash nokia 1680 v0682flashear nokia 1680c
SEO Blog

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts