sigmatel S3 format successful with MULTI BOX



1) Open padfinder tool and select 3 is TX 10 is RX manualy(right click to select TX ,RX).then connect phone to pad finder.click unibox mode
.
2) open Chinese_Cocktail_MTKCST_v9.0.exe tool select flash type 2 then press connect button.your mobiles connect successful.then do nor format...




Ready...
Profile file not exist!
Default file will be created

Press and hold power on button...OK
Loading Boot.......OK
CPU ID: 6225-8A
NOR Flash ID:0001227E - 2000 - AMD AM49PDL127BH Size:16Mb
!!! Unknown Firmware version !!!
Please read full flash backup and send it to [Dear Guest/Member you can't see link before replyclick here to register]
Detecting EEPROM data...
WARNING! Automatic EEPROM detection method is used!
Please read phone Flash backup before start of any operation
Version: 98_V1.0.013_080306
Branch: 06B GINWAVE25_06B- ے --…ب)
IMEI: 135790246811220
Phone locks status:
User lock: 1122 - OPEN
Code2: 34
Code3: 5678
Code4: 3344
Code5:
IMSI: 000000000000000000
Reading calibration data...OK
Ready...
Formating NOR EEPROM...
Erasing Flash...OK
Now please reconnect phone battery and switch on phone.
Ready...

100000000000000000000000000000% success