PDA

View Full Version : How to update Samsung I9100 Galaxy S2 to android 2.3.4 gingerbread.



Rahul-Bhutani
28th-July-2011, 12:43 PM
1. Download the latest firmware version you want from above and extract the .tar file in the zip archive and save it in a new folder.

Flash File:http://hotfile.com/dl/124839941/a17b394/I9100XXKG3.rar.html
Flasher:http://hotfile.com/dl/116095613/1d3d429/Odin3_v1.83.exe.html
Pit:http://hotfile.com/dl/116093205/245d3f0/u1_02_20110310_emmc_EXT4.pit.
Password: samfimrware.com

2. Reboot the Samsung Galaxy S II into DOWNLOAD MODE.
Turn the phone power OFF, then press and hold VolumeDown+OK+Power at the same time.

http://1.bp.blogspot.com/--q1MpYeLAW8/Tc9tdn86cXI/AAAAAAAABkA/nkUxOLwdwW0/s320/Galaxy-S2-I9100-Download-Mode.jpg (http://1.bp.blogspot.com/--q1MpYeLAW8/Tc9tdn86cXI/AAAAAAAABkA/nkUxOLwdwW0/s1600/Galaxy-S2-I9100-Download-Mode.jpg)
You should see a warning asking you to press volume up if you want to continue or volume down to cancel, press volume up. You are now in download mode!

3. Run the downloader program ODIN3 1.85 .exe.

http://4.bp.blogspot.com/-lDiQXUFnCk4/TdPiWmcSeSI/AAAAAAAABk4/GKAejMYUK04/s320/I9100+2.3.3+gingerbread+update+0.jpg (http://4.bp.blogspot.com/-lDiQXUFnCk4/TdPiWmcSeSI/AAAAAAAABk4/GKAejMYUK04/s1600/I9100+2.3.3+gingerbread+update+0.jpg)
4. DO NOT CLICK REPARTITION Checkbox. Just leave the AUTO REBOOT and RESET TIME remain checked.

http://2.bp.blogspot.com/-0DH1Csmf_l4/TdPiZ5yrkRI/AAAAAAAABk8/WCDIDjQi-EQ/s320/I9100+2.3.3+gingerbread+update+1.jpg (http://2.bp.blogspot.com/-0DH1Csmf_l4/TdPiZ5yrkRI/AAAAAAAABk8/WCDIDjQi-EQ/s1600/I9100+2.3.3+gingerbread+update+1.jpg)
5. Click on the PDA button then browse to the .tar file that you extracted and load it.
DO NOT PUT .PIT FILE.

http://2.bp.blogspot.com/-yaWqcbB0Wiw/TdPidEosieI/AAAAAAAABlA/QQzvKtZpEEE/s320/I9100+2.3.3+gingerbread+update+2.jpg (http://2.bp.blogspot.com/-yaWqcbB0Wiw/TdPidEosieI/AAAAAAAABlA/QQzvKtZpEEE/s1600/I9100+2.3.3+gingerbread+update+2.jpg)
6. Connect the USB cable and wait for the ID:COM box turn yellow to know that the handset is connected to the PC properly. If you still do not get any results, try another USB port on your computer.

http://4.bp.blogspot.com/-vjy9MpLbPUc/TdPigBHj9KI/AAAAAAAABlE/M4qK8xKb2hI/s320/I9100+2.3.3+gingerbread+update+3.jpg (http://4.bp.blogspot.com/-vjy9MpLbPUc/TdPigBHj9KI/AAAAAAAABlE/M4qK8xKb2hI/s1600/I9100+2.3.3+gingerbread+update+3.jpg)
7. Click START button to begin flashing.

http://3.bp.blogspot.com/-wVSKbAR5Z68/TdPijSpE5nI/AAAAAAAABlI/PpE_zmTSVzQ/s320/I9100+2.3.3+gingerbread+update+4.jpg (http://3.bp.blogspot.com/-wVSKbAR5Z68/TdPijSpE5nI/AAAAAAAABlI/PpE_zmTSVzQ/s1600/I9100+2.3.3+gingerbread+update+4.jpg)

8. Do not touch anything nor disconnect the cable or turn off the device, a "PASS" word flashes when the flashing is successfully completes, the device will reboot when it finished.

http://1.bp.blogspot.com/-GpWJq8sZpks/TdPiTrlLYWI/AAAAAAAABk0/HxaXZ8c71oU/s320/I9100+2.3.3+gingerbread+update+5.jpg (http://1.bp.blogspot.com/-GpWJq8sZpks/TdPiTrlLYWI/AAAAAAAABk0/HxaXZ8c71oU/s1600/I9100+2.3.3+gingerbread+update+5.jpg)
After this procedure the Samsung Galaxy S II is un-rooted so you may need to root the device again...

raja16sep
29th-July-2011, 04:34 PM
Hi,
First check then copy past. Donot waist the time of people. Check password.

Its not as u mentioned :- samfirmware.com ... this is correct.

Regards

Raja

milkyctg
17th-September-2011, 12:08 AM
1. Run Samsung I9100 Galaxy S II Downloader.
2. Check These options: Re-Partition , Auto Reboot , F.Reset Time.
3. Click PIT button and select: u1_02_20110310_emmc_EXT4.pit
4. Click PDA button and select: CODE_I9100xxxxx_CL161513_REV02_user_low_ship.tar.m d5
5. Click PHONE button and select: MODEM_I9100xxxxx_REV_02_CL995882.tar.md5
6. Click CSC button and select: GT-I9100-MULTI-CSC-Oxxxxx.tar.md5
7. Put phone into Download mode: ( Press Volume Down + OK + Power ).
8. Connect Cable to phone and PC.
9. Make sure that the program detect the phone.
10. Click Start button and wait the program to finish downloading the firmware files to phone.
11. After phone reboot Do full reset by this Code *2767*3855#
N.B. All credits goes to Tsarkh(tsar3000)

markfinn
21st-September-2011, 07:39 PM
The new 2.3.4 firmware update gingerbread arrived Samsung Galaxy S2.In this tutorial, you will learn step by step "how to update the Samsung Galaxy S2 GT I9100 gingerbread XXKG12.3.4 firmware." The new firmware update comes with many new improvements like longer battery life, video calling is also a gingerbread 2.3.4update increased.It leaked version, and not the official version, the G - Talk and free RAM enabled.